Neptune HP PROTECTUS III, Installation And Maintenance Manual

Page: 23 / 68

HP PROTECTUS
®
III Installation and Maintenance Guide
9
Chapter 3: Installing the HP PROTECTUS
®
III
This chapter steps you through installing the HP PROTECTUS
®
III meter.
Prior to Installation
This section defines how to unpack and store the HP PROTECTUS III before you install it.
Storage
Upon receipt, inspect the shipping containers for damage and inspect the contents of any
damaged cartons before storing. After inspecting, store the cartons in a clean, dry
environment.
Unpacking
Do not lift the assembly by a single center strap around the meter body, or by either end
alone.
After unpacking the HP PROTECTUS III meter, inspect it for damage. If the meter appears to
be damaged, notify your Neptune Territory Manager or distributor. If one or more items
requires reshipment, use the original cardboard box and packing material.
Tools Needed
The following table shows the recommended tools you need to successfully install the
HP PROTECTUS III meter.
Some items do not apply to your specific installation, or the list may not contain all required
tools or materials.