Neptune 13458-000, Installation And Maintenance Manual

Page: 126 / 150

United States Canada Mexico
l
AT&T
l
Verizon
l
Rogers
l
Bell
l
Telus
TBD
Table 36 – Certifying Carriers by Nation
Configuring the Cellular Modem
You can configure CalAmp's Vanguard 3000 modem to operate in
either a GSM or CDMA network. To manually configure the
cellular modem for the Gateway, you need a Vanguard 3000
modem from CalAmp, and then complete the steps to configure it.
Refer to the quick start guide for the Vanguard 3000 on CalAmp's
website:
http://www.calamp.com/help/devicehelp/desktop/homepage.htm.
Equipment Required
To configure the cellular modem, you need the following
equipment.
l
Laptop or PC with Ethernet network port
l
Vanguard 3000 Quick Start Guide
l
Ethernet cable
l
Cellular service provider, SIM card, if applicable, APN, and
password (from the cellular service provider)
Certain cellular services, such as CDMA, don't require a
SIM card to operate. However, some cellular services do
require a SIM card, such as GSM (EDGE and GPRS). Verify
with cellular service provider.
Configuring the Modem
The customer maintains the username, password, and APN
information provided by the celluar service provider.
108 R900 Gateway Installation and Maintenance Guide
Appendix D Cellular and Ethernet Considerations