Actuators
Specification & Installation Instructions
TMN-RMN_210804
1
Technical Data
TM000N
TM020N
TM060N
TM080N
RM000N
RM020N
RM060N
RM080N
Auxiliary switches
No
Yes(2)
No
Yes (2)
No
Yes (2)
No
Yes (2)
Fail safe - Enerdrive
No
Yes
No
Yes
Power consumption
15 VA
40 VA Peak, 15 VA
24 VA
40 VA Peak, 24 VA
Torque
180 in.lb. [20 Nm] at rated voltage
360 in.lb. [40 Nm] at rated voltage
Power supply
22 to 26 Vac or 28 to 32 Vdc
Running time through 90º
40 to 50 sec torque dependant
Feedback
4 to 20 mA or 2 to 10 Vdc adjustable
Electrical connection
18 AWG [0.8 mm
2
] minimum
Inlet bushing
2 inlet bushing of 7/8 in [22.2 mm]
Control signal
Analog, Digital or PWM programmable (factory set with analog control signal)
Angle of rotation
0 to 90 degrees, electronically adjustable (factory set with 90º stroke)
Direction of rotation
Reversible, Clockwise (CW) or Counterclockwise (CCW) (factory set with CW direction)
Operating temperature
0ºF to 122ºF [-18º C to 50ºC]
Storage temperature
-22ºF to 122ºF [-30º C to 50ºC]
Relative Humidity
5 to 95 % non condensing.
Weight
6 lbs. [2.7 kg]
8.5 lbs. [3.8 kg]
Warning: Do not press the clutch when actuator is powered
Dimensions
Dimension
Imperial (in) Metric (mm)
A
5.20
132.1
B
1.33
33.8
C
9.13
231.9
D
3.55
90.2
Caution
We strongly recommend that all Neptronic
®
products be wired to a separate transformer and that transformer shall service only Neptronic
®
products. This precaution will
prevent interference with, and/or possible damage to incompatible equipment.
When multiple actuators are wired on a single transformer, polarity must be observed. Long wiring runs create voltage drop which may affect the actuator performance.
1
Enerdrive System
U.S.A. Patent #5,278,454
Features:
•
Clutch for manual adjustments.
•
Maintenance free.
•
Position indicator.
•
Control signal fully programmable.
•
Brushless DC driven motor.
•
Fail safe by
Enerdrive System
1
(on models 060 & 080).
•
Auxiliary switches
(on models 020 & 080).
TM000N
TM020N
TM060N
TM080N
RM000N
RM020N
RM060N
RM080N
