N27 EVK User Guide
Chapter 4 Commissioning
Copyright © Neoway Technology Co., Ltd
7
4
Commissioning
N27 can be commissioned either through a serial port or a USB port. This chapter describes how to
connect the module and how to implement commissioning through either port.
4.1
Through Serial Port
Step 1:
Connect the EVB board and start it.
1.
Use an external power source to supply power.
2.
Connect it to the computer through the M5X0-PWR board.
3.
Insert a SIM card and install an antenna onto the EVB board.
4.
Hold the PWRKEY_N button for 1 seconds, and the module starts up.
