POC-500 Series
89
4.12 Boot Type (Legacy/ UEFI)
The system supports both Legacy and Unified Extensible Firmware Interface (UEFI)
boot modes. UEFI is a specification proposed by Intel to define a software interface
between operating system and platform firmware. Most modern operating systems,
such as Windows 10 and Linux support both Legacy and UEFI boot modes. The
Legacy boot mode uses MBR partition for disk and VBIOS for video initialization, the
UEFI boot mode uses GPT partition which supports greater than 2TB partition size
and GOP driver for faster video initialization.
NOTE
If you choose Legacy mode, you will not be able to create disk partitions greater than
2TB or use TPM 2.0 function.
To configure Boot Type:
1.
When system boots up, press F2 to enter BIOS setup utility.
2.
Go to
[Boot]>[Boot Type]
, press ENTER to bring up options, Dual Boot
(UEFI), Legacy Boot Type, UEFI Boot Type.
3.
Highlight your selection and press ENTER.
4.
Press F10 to “Exit Saving Changes”.
Summary of Contents for POC-500 Series
Page 1: ...Neousys Technology Inc POC 500 Series User Manual Revision 1 0...
Page 21: ...POC 500 Series 21 1 5 2 DIO Panel View 1 5 3 COM and Audio Port Panel View...
Page 22: ...POC 500 Series 22 1 5 4 Bottom View...
Page 24: ...POC 500 Series 24 1 6 2 DIO Panel View 1 6 3 COM and Audio Port Panel View...
