POC-500 Series
83
4.7
System Power Configuration (POC-545/ 546)
The system power configuration allows you to set the maximum power consumption
of the system. Depending on your application, you can configure the option to 54W
for higher performance or 35W for lower power-consumption. You may also leave the
setting on Auto and allow the system to auto regulate power consumption according
to application needs.
To set System Power Consumption settings:
1.
Press
F2
when the system boots up to enter the BIOS setup utility.
2.
Go to
[Power]
[System Power Configuration]
3.
Use the up/ down arrow to highlight and select between Auto/ 35W/ 45W/ 54W
Configuration.
4.
With your option highlighted, press Enter to select.
5.
Once set, press
F10
to save setting and exit.
Summary of Contents for POC-500 Series
Page 1: ...Neousys Technology Inc POC 500 Series User Manual Revision 1 0...
Page 21: ...POC 500 Series 21 1 5 2 DIO Panel View 1 5 3 COM and Audio Port Panel View...
Page 22: ...POC 500 Series 22 1 5 4 Bottom View...
Page 24: ...POC 500 Series 24 1 6 2 DIO Panel View 1 6 3 COM and Audio Port Panel View...
