Nuvo-7501 Series
29
2.5
Internal I/O Functions
In addition to I/O connectors on the front panel, the system also provides internal
on-board connectors, such as remote on/off control, LED status output, internal USB
2.0 ports and etc. In this section, we’ll illustrate these internal I/O functions.
2.5.1
Status LED Output & Remote On/ Off Control
For an application which places the system inside a cabinet, it’s useful to have an
external system status LED indicators. The system provides a 2x6, 2.0mm pitch pin
header to output system status such as power, HDD, watchdog timer, and control
system on/ off remotely.
The status LED output has a built-in series-resistor and provides 10mA current to
directly drive the external LED indicators. System on/ off control is also provided so
you can use an external non-latched switch to turn on/ off the system exactly the
same as the power button on the front panel. The following table describes the pin
definition of the status LED output.
Location of status LED output & remote on/ off control