Nuvo-8240GC Series
85
4.1.3
Primary Display Selection
With this setting, you manually select your choice of internal graphics card (IGFX), the add-on
PCIe graphics card (PEG) or leave it on Auto.
To set the primary display:
1. When system boots up, press F2 to enter BIOS setup utility.
2. Go to
[Advanced]
>
[System Agent (SA) Configuration]
>
[Graphics Configuration]
>
[Primary Display],
select an option and press ENTER.
3. A small window appears and you may enter a maximum delay value of up to 30,000ms.
4. When done, press F10 to “Exit Saving Changes”
Summary of Contents for Nuvo-8240GC Series
