Neousys Technology Nuvo-8240GC Series, User Manual, Page: 34 / 139

Nuvo-8240GC
34
2.5 Internal I/O Functions
In addition to I/O connectors on the front panel, the system also provides internal on-board
connectors, such as remote on/off control, LED status output, internal USB 2.0 ports, etc. In
this section, we’ll illustrate these internal I/O functions.
2.5.1 Dual SODIMM DRAM Slot
The system motherboard supports four 260-pin SODIMM socket for installing DDR4 memory
module up to 128GB. Each slot supports single module DDR4 2133MHz SODIMM up to 32GB
capacity.
NOTE
When changes are made to DRAM module(s), such as additionally install or remove and
reinstall (into the same/ different slot, it will result in an approximately 30~60 seconds delay
when booting up for the first time after such change(s).