manualshive.com logo in svg

Neousys Technology Nuvo-8208GC Series, User Manual, Page: 76 / 141

Share
Download
Neousys Technology Nuvo-8208GC Series User Manual Download Page 76

Nuvo-8208GC 

76 

3.5.2 

Powering On Using Wake-on-LAN 

Wake-on-LAN (WOL) is a mechanism to wake up a computer system from a S5 (system off 

with standby power) state via issuing a magic packet. The system’s Wake-on-LAN compatible 

GbE port is shown below. 

 

NOTE 

Please make sure the Intel chipset and Ethernet driver has been properly installed 

prior to setting up WOL function.

 

To enable WOL function, please set up WOL settings in the BIOS and in the operating system 

by follow the steps described below. 

1. 

When the system boots up, press F2 to enter BIOS setup utility. 

2. 

Go to the 

[Power]

>

[Wake On LAN]

 and set it to 

[Enabled]

. 

3. 

Press F10 to “

Save changes and exit BIOS

” and allow the system boot into the 

operating system. 

4. 

Once booted into the Windows system, press “

Windows key + E

”, right-click on 

Summary of Contents for Nuvo-8208GC Series














































































































































Reviews:

No comments