manualshive.com logo in svg

Neousys Technology Nuvo-8208GC Series, User Manual, Page: 75 / 141

Share
Download
Neousys Technology Nuvo-8208GC Series User Manual Download Page 75

Nuvo-8208GC Series 

75 

3.5 

Powering On the System 

There are three methods to power on the system 

 

Pressing the power button 

 

Sending a LAN packet via Ethernet (Wake-on-LAN) 

 

Powering on via ignition control (please refer to 

Ignition Control

 section) 

3.5.1 

Powering On Using the Power Button 

This is the simplest way to turn on your system. The power button is a non-latched switch and 

behaves as the ATX-mode on/off control. With DC power connected, pushing the power 

button will turn on the system and the PWR LED indicator will light up. Pushing the button 

when system is on will turn off the system. If your operating system supports ATX power mode 

(i.e. Microsoft Windows or Linux), pushing the power button while the system is in operation 

will result in a pre-defined system behavior, such as shutdown or hibernation. 

 

Summary of Contents for Nuvo-8208GC Series














































































































































Reviews:

No comments