Nuvo-8208GC
106
4.1.15
Legacy/ UEFI Boot Device
When you wish to set a designated boot device, you may set it as the first device to boot in
Legacy or UEFI Boot Device setting. Or if you wish to manually select a boot device, you may
do so by pressing F12 when the system boots up.
To set boot order for devices in UEFI Boot Device:
1.
When system boots up, press F2 to enter BIOS setup utility
2.
Go to
[Boot] > [UEFI Boot Device]
3.
Highlight the device you wish to make boot order changes to and press F5/ F6 or +/ - to
change device boot order.
To select boot order for devices in Legacy Boot Device:
1.
When system boots up, press F2 to enter BIOS setup utility
2.
Go to
[Boot] > [Legacy Boot Device]
, you can choose the type of device to list by
selecting “By Device or By Device Type”.
3.
Highlight the device you wish to make boot order changes to and press F5/ F6 or +/ - to
change device boot order.
Summary of Contents for Nuvo-8208GC Series
