94
3.2.9
HDD/ SSD Installation to Hot Swappable Tray (Nuvo-700LP Systems Only)
NOTE
Supports up to 9.5mm thickness HDD/ SSD.
The system features a 2.5” external hot-swappable HDD/ SSD slot. It coincides with the
internal drive and can be configured into RAID 0 or 1 storage. To install HDD/ SSD into
the 2.5” external hot-swappable slot, please refer to the following procedure:
1.
Pull the handle on the 2.5” external hot-swappable slot to open it.
Pull handle
Open slot door
2.
With the label side facing upward, insert the SATA connector side of the 2.5” HDD/
SSD into the slot first. You may feel resistance when the SATA connectors meet,
push it firmly until the 2.5” HDD/ SSD is fully inserted into the slot.
3.
Push the handle into the 2.5” slot until it snaps into position. A key is provided (in
accessory box) to lock the external slot.
Key in accessory box
2.5” HDD/ SSD slot lock
Summary of Contents for Nuvo-7000 Series
