Nuvo-6000 Series User’s Manual
Copyright © 2016 Neousys Technology Inc. All Right Reserved.
Page 12 of 100
2.2 Front Panel I/O Functions
On Nuvo-6000, we design all general-purpose I/O functions on the front panel so you can
easily access them. In this section, we’ll illustrate each I/O function on the front panel.
2.2.1 Power Button
The power button is a non-latched switch for ATX mode on/off
operation. To turn on the Nuvo-6000, press the power button
and the PWR LED is lighted up. To turn off the Nuvo-6000, you
can either issue a shutdown command in OS, or just simply
press the power button. In case of system halts, you can press
and hold the power button for 5 seconds to compulsorily shut
down the system. Please note that a 5 seconds interval is kept
by the system between two on/off operations (i.e. once turning
off the system, you shall wait for 5 seconds to initiate another
power-on operation).
2.2.2 Reset Button
The reset button is used to manually reset the system in case
of any abnormal condition. To avoid unexpected operation, the
reset button is hidden behind the front panel. You need to use
a pin-like object to push the reset button.
