background image

Copyright Notice 

 

Copyright Notice 

 

All rights reserved. This publication may not be reproduced, transmitted, 

transcribed, stored in a retrieval system, or translated into any language or 

computer language, in any form or by any means, electronic, mechanical, 

magnetic, optical, chemical, manual or otherwise, without the prior written 

consent of Neousys Technology, Inc. 

Disclaimer 

This manual is intended to be used as an informative guide only and is subject 

to change without prior notice. It does not represent commitment from Neousys 

Technology Inc. Neousys Technology Inc. shall not be liable for any  direct, 

indirect, special, incidental, or consequential damages arising from the use of 

the product or documentation, nor for any infringement on third party rights. 

 

Patents and 

Trademarks 

Neousys, the Neousys logo, Expansion Cassette, MezIO

TM

Windows is a registered trademark of Microsoft Corporation. 

 are registered 

patents and trademarks of Neousys Technology, Inc. 

Intel

®

NVIDIA

, Core™ are registered trademarks of Intel Corporation 

®

, GeForce

®

All other names, brands, products or services are trademarks or registered 

trademarks of their respective owners. 

 are registered trademarks of NVIDIA Corporation 

 

Summary of Contents for Nuvo-5501 Series





























































































Reviews: