Nuvo-5095GC Series User’s Manual
Copyright © 2017 Neousys Technolgy Inc. All Right Reserved.
23
2.3.3 USB2.0 Connectors
In addition to USB 3.0, Nuvo-5095GC Series provides four USB 2.0 ports on the back panel.
They are implemented by native xHCI (eXtensible Host Controller Interface) controller in
Q170 chipset and are compatible with USB 2.0, USB 1.1 and USB 1.0 devices. Legacy
USB support is also provided so you can use USB keyboard/mouse in DOS environment.
Due to the nature that XHCI driver is not natively included in Windows 7, you may
encounter the issue of USB keyboard/mouse not working when installing Windows 7.
Neousys offers a Windows-based batch file and step-by-step guide to help you. Please
refer to Appendix A for information of installing Windows 7 on Nuvo-5095GC series.
2.3.4 Speaker-out and Mic-in Audio Jacks
Nuvo-5095GC series provides audio function using Intel
®
High Definition Audio in Q170
chipset and Realtek ALC262 codec. There are two audio jacks on the back panel. The left
one is used for microphone input, and the right one is used for speaker output. To utilize the
audio function in Windows, you need to install corresponding drivers for both Intel
®
Q170
chipset and Realtek ALC262 codec. Please refer to section 4.5 for information of driver
installation.
