Nuvo-5000 Series User’s Manual
Copyright © 2016 Neousys Technology Inc. All Right Reserved.
- 20 -
2.2 Front Panel I/O Functions
On Nuvo-5000 series, plenty of I/O functions are provided on front panel and back panel so
you can easily access them. All models of Nuvo-5000 series share the same I/O allocation
and the only difference is the number of Ethernet port. We use Nuvo-5006 as an example
for illustrating I/O functions. Most common computer I/O functions are placed on the front
panel. In this section, we’ll illustrate each I/O function on the front panel.
NOTE
For demonstration purposes, Nuvo-5000 series will be used in most illustrations.
2.2.1 Power Button
The power button is a tact switch for ATX mode on/off operation. To turn on the Nuvo-5000
controller, press the power button and the PWR LED is lighted up. To turn off the
Nuvo-5000 controller, you can either issue a shutdown command in OS, or just simply
press the power button. In case of system halts, you can press and hold the power button
for 5 seconds to compulsorily shut down the system. Please note that a 5 seconds interval
is kept by the system between two on/off operations (i.e. once turning off the system, you
shall wait for 5 seconds to initiate another power-on operation).
