Nuvo-3000 Series User’s Manual
Copyright © 2013 Neousys Technology Inc. All Right Reserved.
Page 27 of
101
Nuvo-3000 has multiple display outputs on its front panel for connecting different displays
according to your system configuration. DVI/HDMI transmits graphics data in digital format
and therefore can deliver better image quality at high resolution. Two DVI/HDMI connectors
on the front panel can either output DVI signals or HDMI signal depending on the display
device connected. They support up to 1920x1200 resolution. You shall need a DVI to HDMI
cable when connecting to a HDMI display device.
To achieve best DVI/HDMI output resolution in Windows, you need to install corresponding
graphics driver. Please refer to section 4.3.2 for information of driver installation.
2.2.11 USB 2.0 Connectors
In addition to four USB 3.0 ports, Nuvo-3000 provides another four USB 2.0 ports on the
front panel. By BIOS default, these USB 2.0 ports are operated in EHCI (Enhanced Host
Control Interface) mode and are compatible with USB 2.0, USB 1.1 and USB 1.0 devices.
Legacy USB support is provided so you can use USB keyboard/mouse in DOS
environment.
