Neopost SI60, User Manual

Page: 37 / 87

37
4103241J-37/A
4103980D/A
28/05/2001
Document feeding
3. DOCUMENT FEEDING
3.1 Document feeding in the manual mode (feeder
A)
- Draw apart guides (5) ,
- Place the documents between the guides and adjust the guides
to fit the width of the documents,
To start up the cycle:
- Put the document (with the address side facing upward and the
top of the page on the right side),
- Push the document into the feeder entry, the machine will start
immediately.
5
5
3.2 Document feeding in the automatic mode (feeders
B and C)
- Avoid mixing in the same feeder documents of
different qualities.
- In case of documents particularly difficult to process
(uneven, smooth, rough or sticky), use the half
capacity of the feeder.
- Decollate the sheets by bending the stack of paper
prior to placing it into the feeder,
- Align the edges of the stack by jogging it on a flat
surface.
- To insert several sheets from the same feeder:
place the sheets into the bin, in the reverse order.