26
4103241J-26/A
4103980D/A
28/05/2001
Installation and putting into service
1.4.5 Supervisor mode
Commonly used, the supervisor mode gives access to the advanced
settings of the machine, as described below:
- inserting position,
- flap moistening length,
- aligning of documents from feeders B and C,
- activation of double document detecting function.
In order to avoid that the machine goes wrong unexpectedly, this
mode is protected by an access code that your reseller may provide
you.
In order to access the supervisor mode, turn off the
machine then turn it on after a few seconds. When
the countdown appears under the machine diagram,
press
ESC
. Select “SUPERVISOR” and confirm the
selection by pressing
OK
. Enter the supervisor
code and confirm by
OK
.
Summary of Contents for SI60
