Neopost IN-600 Series User Manual Download Page 79

Page: 79 / 248

How to Change the Date

To change the date that will be printed:

Either:

Press

and select the path: Customize stamp

Press

The Customize stamp screen is displayed.

Select

Date

The Date Advance screen is displayed.

On the Date Advance screen, you can configure the printed date as follows:

To choose another day, select the corresponding item in the list.

The

icon indicates the current selection.

Press

[OK]

to apply changes and return to the configuration menu.

Adding an ERA and Ad Die to the Stamp

You can add an ERA and/or an ad die to the stamp, as illustrated below.

Elements of a stamp imprint

See also

• The supervisor manages the lists of the available ERAs and ad dies. See

Managing

ERAs

on page 193 and

Managing Ad Die

on page 190.

| Page 72 | Nov-12-2015 10:25 |

Processing

Mail

Summary of Contents for IN-600 Series

























































































































































































































































Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands

Neopost IN-600 Series, User Manual

Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands