Neopost IN-600 Series User Manual Download Page 73

Page: 73 / 248

Selecting a Pre-Paid Imprint (PPI)

You can select the PPI to use in a list.

When selecting the PPI type of stamp, a default PPI is automatically
selected.

See also

•

How to Change the Default PPI

on page 173.

•

Managing Prepaid Imprints PPI

on page 197.

How to Select a PPI

To select a PPI:

On the PPI Home screen:

Press

on the keyboard and then select PPI number.

The Select PPI screen is displayed.

To select a PPI on that screen, you can:

- Type the PPI number.

- Select the PPI using the arrows.

Press

[OK]

to validate your selection and return to the Imprint screen.

| Page 66 | Nov-12-2015 10:25 |

Processing

Mail

Summary of Contents for IN-600 Series

























































































































































































































































Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands

Neopost IN-600 Series, User Manual

Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands