Neopost IN-600 Series User Manual Download Page 56

Page: 56 / 248

You are now ready to print.

When you are in the manual amount entry mode, you can modify
the amount by typing the amount with the keypad. You can reset
the value by pressing

[C]

Processing [Manual Amount Entry] Mail

To run mail, follow the procedure below after you have completed the sequence in

How to

Set Postage for [Manual Amount Entry] Mail

on page 46.

How to Process [Manual Amount Entry] Mail

The postage amount is displayed on the home screen. To print postage directly on
mail pieces:

Insert the envelope (or label) into the mail path against the rear-guide wall, with the
side to be printed facing upwards.

The side that you want to print on should be facing upwards.

If a mail piece is bigger than mail path maximum thickness (see

Mail Specifications

on page 231), you may print on a label instead.

Processing

Mail

| Page 49 | Nov-12-2015 10:25 |

Summary of Contents for IN-600 Series

























































































































































































































































Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands

Neopost IN-600 Series, User Manual

Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands