Neopost IN-600 Series User Manual Download Page 181

Page: 181 / 248

Changing the Default ERA

How to Change the Default ERA

To change the default ERA:

As supervisor (see

How to Log in as Supervisor

on page 152):

Press

and select the path:

Default User Settings

Default Imprint

Parameters

ERA

Select the default ERA and press

[OK]

to validate.

See also

•

Managing ERAs

on page 193

Changing the Default Ad die

How to Change the Default Ad Die

To change the default Ad die:

As supervisor (see

How to Log in as Supervisor

on page 152):

Press

and select the path:

Default User Settings

Default Imprint

Parameters

Ad die

Select the default ad die from the list, or

None

for no ad die.

Press

[OK]

to validate.

See also

•

Managing Ad Die

on page 190.

You can order custom Ad Dies. Please contact your Customer
Service.

174

| Page 174 | Nov-12-2015 10:25 |

Configuring

your

Mailing

System

Summary of Contents for IN-600 Series

























































































































































































































































Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands

Neopost IN-600 Series, User Manual

Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands