Neopost IN-600 Series User Manual Download Page 142

Page: 142 / 248

Base errors

This report displays the list of errors encountered on the mailing system and related to the
base.

Requirements

• To generate this report, you have to be logged in as the supervisor.

Outputs

• Screen
• USB Printer (optional)
• USB Key

If you use screen to see this report:

•

Scroll

the errors using the arrow keys

and

•

Press

if you want to go back to the selection of the

output.

Content

Comments

Fields

Reference code of the base error: BAS-XX-YYY (XX is a 2–digit number,
YYY is a 3–digit number).

Code

Date when error occurred.

Date

Number of imprints when this error occurred.

Cycles

See also

•

Generating a Report

on page 120.

Reports

135

| Page 135 | Nov-12-2015 10:25 |

Summary of Contents for IN-600 Series

























































































































































































































































Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands

Neopost IN-600 Series, User Manual

Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands