Neopost IN-600 Series User Manual Download Page 119

Page: 119 / 248

How to Modify an Existing Operator

To modify an existing Operator:

As supervisor (see

How to Log in as Supervisor

on page 152):

Press

and select the path:

Account management

Manage operators

The Manage Operator Wizard window opens.

Select

Operator List

Select the operator and select

Edit / Del.

Select

Edit / Modify

The Edit / Modify screen is displayed.

Change the operator options as needed and press

[OK]

to display the Operator

modification summary screen (Use key

[C]

to clear characters).

Press

[OK]

to accept your changes.

Assigning Accounts to Operators

You can define the Accounts Access to each operator, by assigning accounts to each
operator.

On user screens, only accounts are displayed.

112

| Page 112 | Nov-12-2015 10:25 |

Managing

Accounts

and

Assigning

Rights

Summary of Contents for IN-600 Series

























































































































































































































































Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands

Neopost IN-600 Series, User Manual

Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands