Neopost IN-600 Series User Manual Download Page 106

Page: 106 / 248

Setting up 'Accounts'

In 'Accounts' Mode, users must select an account before they can process their mail. The
user can change accounts at any time during mail processing.

If only one account is available, the Mailing System automatically
selects it at start up.

Implementing the “Accounts Mode”

Follow the steps outlined in

How to Display and Change the 'Account Mode'

on page

96 and select the 'Accounts' Mode.

Create accounts as indicated in

How to Create an Account

on page 104.

When you activate the 'Accounts' Mode, the system creates an
account by default.

'Accounts' Mode Management Menu

In Accounts Mode, the menu allows you to manage your accounts.

See also

• To add, modify or delete accounts, see

Managing Accounts

on page 102.

Managing

Accounts

and

Assigning

Rights

| Page 99 | Nov-12-2015 10:25 |

Summary of Contents for IN-600 Series

























































































































































































































































Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands

Neopost IN-600 Series, User Manual

Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands