Neopost IN-600 Series User Manual Download Page 101

Page: 101 / 248

The Access Control Function

As supervisor, you can set the Mailing System to ask for a PIN code when a user wakes
the machine up to start a session.

This allows you to protect the system and restrict the usage of your funds.

The different access control policies you can implement as the supervisor are:

•

No PIN code

: unlimited access

•

Unique System PIN Code

: single PIN code for all users

•

Personal PIN Codes

: users enter their PIN code to access the system. In this mode,

the operators use only the accounts you allow them to access.

| Page 94 | Nov-12-2015 10:25 |

Managing

Accounts

and

Assigning

Rights

Summary of Contents for IN-600 Series

























































































































































































































































Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands

Neopost IN-600 Series, User Manual

Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands