11
ENGLISH
The job information function is available in all the menus where the button
is shown.
•
: go to the “job selection” menu to select another job (see
3.7.2 ”Select Another Job” on page 29).
•
: go to the “test run” menu to perform a test run (see ”Perform a Test
•
: go to the “counters” menu to reset the counter or to set a stop value
(see 2.4.3 ”Counters” on page 13).
•
: go to the “Fill & Start” menu to start a Fill & Start job (see
3.7.1 ”Using Fill & Start” on page 27).
•
: rotate display 180°.
•
: go to the “main menu (2)”.
The “main menu (2)” shows 6 different functions:
•
: job information (see 2.4.2 ”Job
Info” on page 12): shows job details.
•
: change display and volume
settings (see 2.4.4 ”Display Settings” on page
13).
•
: go to the “job menu” to create,
edit, copy or delete a job (see 2.4.5 ”Job Menu”
on page 14, only for authorized personnel).
•
: go to the “supervisor menu” to change system settings (see
2.4.6 ”Supervisor Menu” on page 14, only for authorized personnel).
•
: return to the “main menu (1)”.
•
: rotate display 180°.
