NeoClock
page 5
6. RECEIVER POSITIONING
1. After connecting the NeoClock receiver and starting your program, check
that the POWER LED (or the
left LED in front view on the desk version)
flashes regularly every second. It shows that the NeoClock receiver works
correctly.
If this is not the case, go to
APPENDIX E
TROUBLESHOOTING.
2. Now find a place for your NeoClock receiver. This step is very important to
ensure the good reception of the product.
Do not fix the NeoClock receiver in any place yet, because you will
perhaps have to move and test it in different places to find the best
reception of the radio signal.
The RADIO SIGNAL LED (or right LED
in front view on the desk version)
will help you find a place where the reception of the radio signal is clear
enough.
Once this
LED remains continuously on
during 2 to 3 minutes without
switching off, you can fix the receiver with it wall support.
The next section will explain you the meaning of the control LEDs.
Positioning of the industrial IP67 casing
NeoClock casing
Flat angle bracket
Lid
Wall