44
Zhejiang Neoden Technology Co., Ltd
(4) The nozzle was blocked
(5) The nozzle is damaged or has a crack
(6) The size issue of nozzle would cause air leakage or insufficient suction
(7) The air hose is blocked or has a leakage problem, and even the pump has an issue.
4. Frequently throwing components. Some suggestions are listed below,
(1) Up-looking camera can’t take a clear picture of component due to brightness issue for example
(2) The pins are distorted
(3) The size or shape isn’t aligned with that in “Footprint library’’
(4) The size of nozzle is inappropriate or insufficient suction.
(5) The nozzle has solder paste or rubbish cause air leakage
(6) The nozzle is damaged or cracked cause air leakage
10.4 Continuous SMT production
Follow the SOP to start production
Notes:
(1) Do not touch the surface to board to avoid damaging the printed solder paste.
(2) When the error message occurs, please check out and solve it a.s.a.p.
(3) Once reloading the component during production, pay attention to the model, specification, polarity and direction of
components.
(4) Clear the reject box timely to avoid wasted materials stacked too high to damage the mount head
11. Structure and maintenance instruction
11.1 Feeder Brief Introduction
