Hangzhou NeoDen Technology Co.,Ltd.
9
Figure (2.1.2.3)
No.1 red areas are original ref
No.2 yellow areas are original boards
No.3 blue area is mirror ref
No.4 light blue areas are mirror boards
Based on actual board to choose an applicable model of panelized mode. Figure (2.1.2.3) left
side is the arrangement way of mirror board and right side is the mirror board showing on
computer.
2.1.2.4 PCB angle correction
PCB angle will influence the accuracy of mounting. The angle closer to 0 degree the better,
and the angel deviation need to be within 1 degree. The angle of PCB is generated according to
panelized PCB coordinates, but we can also adjust the angle by manual. Click “PCB angle”
button, according to the index of machine to choose two points, then a new PCB angle will be
1
3
1
4
2
4
2
4
2
4
1
4
Summary of Contents for 7
Page 4: ......
