◆
Set the working time of the machine, the
machine is set for 24 hours, 1h, 2h, 3h, 4h, 5h......24H mode timing.
（
After booting, the default is untimed,
the screen does not display.Press this button to flash the digital screen (0.5 seconds on, 0.5 seconds off and 3 seconds off)
to enter the timing setting
mode. The timing indicator LED red light is on. Press the "timing button" to set the timer, and the timing display will be 1h
and 2h.....24h to 0h.After
the timing setting is completed, the digital screen will display the timing and temperature, and the timing time will be counted down by 1 hour each
time. When the timing time is counted down to 0h, the heater will automatically shut down, all functions will stop running, and the fan will be shut
down for 30 seconds (under the heating state).Long press the timing key to adjust the timing value quickly.
）
:
Temperature setting key
◆
In the boot state, long press "temperature setting" button for 3 seconds, enter a state of temperature setting, digital display the default temperature
set point and flicker (0.5 seconds, 0.5 seconds, flashing 3 seconds), the temperature of the LED red light, according to the "temperature setting"
button to set the temperature at this time, each time you press the "button" temperature increase 1 degree, when set to 45
℃
, press it again to
5
℃
.After setting, the digital screen will display the current temperature.Long press the "temperature key" to adjust the temperature value quickly.
Note: the default setting temperature of the temperature setting button is 35
℃
(the default setting temperature is restored after shutdown and
startup).Set the temperature range between 5
℃
and 45
℃
.
Under the working condition of high heating power, when the induction temperature is 2
℃
higher than the set temperature, the whole machine will
stop heating.Under the working condition of low heating power, when the induction temperature is 2
℃
higher than the set temperature, the whole
machine will stop heating.
In the working mode of the fan, the temperature displayed by induction is the ambient temperature.When the temperature is higher than the set value,
the whole machine will stop working.
:
Wireless network
usage mode (TBD)
◆
"Wifi usage mode" module is reserved for subsequent update and development.In wifi mode, the corresponding blue indicator light is on.
3.
4 Automatic lock screen function:
◆
In the absence of any operation, the screen will turn off automatically after 20 seconds. In this state, all displays on the control board will go off,
and only the power indicator will be on (red).
3.5
other
functions
：
◆
1: fault hint
When the temperature is E0 and
the buzzer beeps 3 times, the temperature sensor is open.
When the temperature is shown as E1 and the buzzer beeps 3 times, the temperature sensor is short
-
circuited.
◆
2. Test mode:
In the first power on, if you press the temperature setting button within 1.5s after a long beep of the buzzer, you will hear two beeps, indicating that
the computer board has entered the detection mode and the on/key indicator light flashes. In the detection mode, the temperature does not work and
other functions are normal.
4 .
Introduction:
4.1
Depending on the power cord type this fan heater may be used only in household, warehouses and workshops,It incorporates a Adjustable trip
thermostat and a self
-
resetting thermal cut
-
out to control the heating elements. The thermostat feels the air temperature and controls the surrounding
temperature.The fan motor is not controlled by thermostat and it keeps on working when the thermostat cuts off the heating element.The self
-
resetting
thermal cut
-
out will switch off the heater to ensure the safety when overheating.
4.2
When using the heater for the first time, you may notice a slight emission of smoke. This is quite normal and it stops after a short time. The
heating element is made of stainless steel and was coated with protection oil by production. The smoke is caused by the left oil when heated.
5.
Using Instructions:
5.
1
The machine is equipped with a Adjustable trip thermostat, which automatically shuts down when the machine is not in an upright position (falling
back and forth).When it is moved to an upright position, the device will return to normal operation.Always keep the machine upright before starting
5.
2
Position the fan heater so that it stands upright on a firm surface and at a safe distance from wet environments and flammable objects.
5.3
Connect the fan heater to the mains.
5.
4
Set the
Adjustable trip thermostat
knob to the MAX and let the heater operate with full power.
5.
5
The fan heater will switch on when the heating selector is set to one of the power settings.
5.
6
Once the room reaches the required temperature, heating element will stop working but fan also working .Once the temperature decreased, the
heating element will be working. The fan heater now starts and stops automatically and thus keeps the room temperature constant.
5.
7
Before switch off the heater, please turn the thermostat to MIN position and turn the switch to fan position, let the appliance cool down for two
minutes then turn off the heater and pull out the plug.
6. Trouble shooting:
You can solve many common problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the
problem before calling the service centre.
Disposal
Environmental Protection
Problem
Possible cause
Treatment
The heater does not operate, even
when it is plugged in and the
switch, thermostat are switched on
The plug is loose, bad connection
Pull out the plug, check the connection of the plug and
socket. Then connect again.
No power in socket outlet
Insert the plug in a proper socket
The heating element glowing
The input voltage is too high or too low
Use power supply according to the rating on the label
The air inlet grill is blocked
Keep the heater far way from articles like curtain, plastic
bag, paper and other things which can cover the inlet or
can be easily cover on the air inlet
The appliance didn’t heat up, or
only ventilator worked
The switch was not put at heating setting
Turn the switch to heat setting
The thermostat operated
Turn the thermostat and listen if there is open/close
voice. If there is no click and the thermostat is not
damaged, the heater will automatic switch on when the
appliance cooled down
The self
-
resetting cut
-
out operated
Turn the heater off and inspect the blockage of inlet or
outlet.
Disconnect the plug and wait at least 10
minutes
for the protection system to reset before
attempting to restart the heater.
Abnormal noise
The appliance is not stands upright
Put the heater on a level surface
