NENO LEADX Ultra Manual
© NENO-CNC Schweiz 2023
Seite | 8
Safety
Responsibility of the operator
The operator of the NENO LEADX Ultra is responsible for the following points:
1.
The safety instructions have been read and understood.
2.
The construction was carried out completely according to instructions.
3.
The CNC milling machine has been properly tested before each operation and is only put into
operation in perfect condition.
4.
The CNC milling machine is only used with accessories approved by the manufacturer.
5.
Possible precautions (hearing protection, safety goggles, distance to the spindle, etc.) have
been properly taken before commissioning.
6.
Minors have reached the age of 14 before use and a basic technical understanding is
available.
7.
The CNC milling machine must be operated and stored out of the reach of children.
8.
Safety devices such as the emergency stop switch must always be freely accessible.
9.
If you want to make adjustments to the machine, the associated controller or various
system-guided tools, unplug the power as a precaution.
10.
The owner of the machine must ensure that all persons working with the CNC milling
machine have read and understood the safety instructions.
11.
The owner, as well as anyone present while actively working with the machine, must wear
protective clothing as described in this manual.
Personal protective device
Please always ensure that basic personal protection measures are observed at every company and
for bystanders.
12.
Safety goggles (protection of the eyes from flying chips and broken milling cutter)
13.
Hearing protection (protection of the ears from loud background noise)
14.
Protective gloves (protection of hands from heat and cuts when handling milling cutters)
15.
Tight-fitting work clothes (protection against accidental entanglement of clothing in spindles
or guides)
16.
Secure shoulder-length or even longer scalp hair with a hairnet or cap so that it cannot get
into the linear guides and/or the rotating milling tools.
17.
Protective mask (protection against carcinogenic fumes and milling dusts)
