NENO LEADX Ultra Manual
© NENO-CNC Schweiz 2023
Seite | 43
3.2.3 - Attachment of the middle sections to the Y2 axis.
Article Nr.
Description
Quantity
1
M5 x 8mm flat head screw
2
2
L2 angle bracket
1
Slide the previously inserted T-nuts of the C-beam of the Y2 axis to the correct places and attach the
L2 angle brackets of the middle sections with the M5 x 8 mm lens screws.
Repeat the previous step for all middle sections that you want to attach to the fixed side. The
distances between the individual sections should always be the same.
Make sure that the Y2 axis is flush with the bracket and thus with the end of the 2040 profile. The
fixed side must be the reference for the entire machine.
2x/
3x
