NENO LEADX Ultra Manual
© NENO-CNC Schweiz 2023
Seite | 18
2.1.4 HGH storage blocks
Article Nr.
Description
Quantity
1
HGH 15 bearing blocks
2
2
HGR 15 rail
1
Slide the 2x HGH 15 bearing blocks onto the HGR 15 rail.
To avoid the loss of bearing balls, store the supplied plastic holder on the bearing block. When
mounting the bearing block on the rail, use the rail to push the plastic bracket out of the block so
that the steel balls are preloaded and in contact with a rail at all times.
Although this is not shown on the drawing, it is best if the grease nipple faces outwards to facilitate
access during maintenance.
