NENO LEADX Ultra Manual
© NENO-CNC Schweiz 2023
Seite | 14
2.0 Y-axis
It is recommended to read and understand all steps between 2.1 and 2.7 before starting assembly.
The t-slot nuts must be inserted into the channel of the aluminium profile for later steps, and if they
are missing, the steps must be dismantled again.
2.1 C-beam and HGR rail
Find the C-Beam profile and the HGR rails used for your Y-axis. If your machine size differs from X to
Y, e.g. if you purchased a size of 1000 mm x 1500 mm, the second length, which in this example is
1500 mm, is the Y-axis.
