neno DENTI, User Manual

Page: 9 / 52

9
05. USING THE DEVICE
1. Place the brush head onto the device. It should be put on the plastic part
with the light inside it.
2. Press the power button of the brush to turn on the light of the device head.
3. Squeeze toothpaste onto the brush.
4. Press the toothbrush gently to your teeth and gums.
5. Press the power button again to turn on the brush vibration and start thoro -
ughly cleaning the baby’s teeth. Every 30 seconds of brushing, the toothb -
rush stops vibrating for 1 second to allow the user to Change the brushed
space. Correct brushing of teeth should take a total of 2 minutes. The device
will turn off automatically after 2 minutes.
6. When you’re done brushing your teeth, turn off the toothbrush by pressing
the power button again.
7. After cleaning the baby’s teeth, wash the toothbrush under running water.
Remove the remaining water from the bristles of the brush and use soft
cloth to wipe the handle of the device.
8. When you are not using the brush, keep it upright.
NOTE: to avoid toothpaste splashing around, turn off the device before removing it
from the baby’s mouth For the sake of your child’s hygiene and safety, replace the
brush head every three months.
06. CLEANING THE BRUSH
1. Wash the brush head and its bristles after using the device and let it dry
naturally.
2. Do not press the bristles or pull them out with your fingers. This can deform
the toothbrush and destroy it.
3. Wipe the handle with a soft piece of cloth and let it dry naturally.
4. Do not submerge the handle underwater.
5. Do not use water above 40 °C or acidic cleaning agents to clean the device.
07. FAQ
Q: Vibrations weaken during use:
A: You push the toothbrush too hard. It should gently touch the teeth.
08. SPECIFICATION
Power source: 1x AAA battery
Waterproof: IPX7
Nylon bristles: Yes
Strokes per minute: 17000
Built-in timer: Yes
Built-in LED light: Yes