Quick Start Guide
Welcome to
Miboko
®
What is in your
Device Box?
Docking Station - Used to charge the Transmitter
Transmitter - Front View
Transmitter - Back View
Contact Slot
Arm Slots
Loop
Gold Contacts
Miboko
®
Our mission is to make sure you can look and feel
the way you want to in everyday life and stay safe
from serious health issues, both now and in the future.
Your journey starts right here. With Miboko
®
you can
learn how to give your body what it needs to live
the life you want today and secure the health you need
tomorrow.
This
Quick Start Guide takes you through the contents of the
Device and Sensor Kit Boxes and shows you the simple process
of getting started with your device.
It would help if you kept your Quick Start Guide somewhere
safe, as you may need to refer to them in the future.
Please
read through all of the Quick Start Guide steps carefully
before applying your Transmitter, starting with charging the
Transmitter for up to 6 hours before use.
All of the contents provided are important for getting the most
out of your device. They will help you align all of the important
parts of your
Sensor and Transmitter and ensure that your
device is securely in place. Your glucose readings are just a
few steps away!
Transmitter Password Card
Serial No.
Transmitter ID:
Password:
Transmitter/ Password Card - Contains the Transmitter Number
and case sensitive Password
Starting out with Miboko
®
What is in your
Sensor Kit Box?
Sensor Kit - Supplied in a foil pouch which includes a
Sensor & Guiding Frame
Sensor - Detects the glucose in the interstitial fluid
Guiding Frame - To help accurately position the
Sensor on to your arm
1
2
Press
Press
B
A
Upper Backing Layer
Lower Backing Layer
Clip
Arms
Sensor Contacts
Sensing
Area
Fabric
Tab
Foam
Tab
Note: Do not open the Sensor and Guiding Frame pouch
until the Transmitter is fully charged and you are ready
to use your device.
What is in your
Sensor Kit Box? (Cont.)
Hydrogel Disc - Collects glucose from the skin, during wear
Hydrogel Disc - Supplied in a foil pouch on a single folded
plastic liner.
Hydrogel Disc
Plastic Liner Tab
Note: Do not open the Hydrogel pouch until the Transmitter
is fully charged and you are ready to use your device.
Charge The
Transmitter
Connect To The App
1. Place the Transmitter
onto the Docking Station
with the three gold
contacts facing down and
close the lid.
Connect the Docking
Station to the power
supply.
2. Charge the Transmitter
fully before use. This can
take up to 6 hours.
The
GREEN LIGHT
indicates that the Docking
Station has a power
connection, and the
AMBER LIGHT
indicates
that the Transmitter is
charging. The amber
light will turn off when
the Transmitter is fully
charged.
3. Once charging is
complete, remove the
Transmitter.
1
2
1. To connect your Transmitter
to the App, tap
‘Find your
device’.
2. If the location and
Bluetooth permission windows
appear (depends on the phone
used), you must tap the
OK
option to enable the App
connection to the Transmitter.
3. The App will scan for
Transmitters within range.
The number for your device
will be on the Transmitter /
password card. Tap on your
Transmitter.
4. When prompted, enter the
password located on the card
supplied with the device. The
password is case sensitive.
Find your device
Remember that you need to have
Bluetooth enabled to connect to devices
Searching for your device...
miboko.c
om
