Chapter 2 Hardware Setup
11
MSATA1
mSATA Slot
CPU (Central Processing Unit)
When you are installing the CPU, make sure that you install the cooler to
prevent overheating. If you do not have the CPU cooler, consult your dealer
before turning on the computer.
Important
Overheating
Overheating will seriously damage the CPU and system. Always make sure
the cooling fan can work properly to protect the CPU from overheating. Make
sure that you apply an even layer of thermal paste (or thermal tape) between
the CPU and the heatsink to enhance heat dissipation.
Replacing the CPU
While replacing the CPU, always turn off the power supply or unplug the
power supply’s power cord from the grounded outlet first to ensure the safety
of CPU.
Introduction to LGA1155 CPU
The surface of LGA1155 CPU. Remember to apply some thermal paste on it
for better heat dispersion.
CPU & Cooler Installation
When you are installing the CPU,
make sure the CPU has a cooler attached
