7
3.4 LED Indicators
PWR:
Red LED, lights up when DVR is powered on, and goes out when power is cut off.
RUN:
Keeps on when DVR is being launched and flashes when DVR is running.
ALM:
Alarm indicator. It keeps on with the record when there is Alarm-in, G-sensor activation
or motion detection or speed or panic button event alarm.
GPS:
Lights up when GPS is running.
CH1~4:
Lights up when corresponding camera is running.
SD1~4:
Lights up when corresponding SD card is available, and flashes when recording.
CELL:
Cellular indicator. It always lights up when uploading data and off when CELL has
been off or cellular module in abnormal status.
WIFI:
WIFI indicator. It always lights up when uploading data and off when WIFI has been
off or WIFI module in abnormal status.
3.5 LCD monitor
EDID (Extended Display Identification Data) is automatically acquired when powered
on. DVR will read the recommended resolution of the monitor at startup. If the
recommended resolution of the monitor is 1080P, the DVR output will be 1080P;
otherwise it will be 720P.
10 inches HD monitor introduction
