R75M Debris Sweeping Sprinkler
Maintenance & Operation Instructions
Squeeze tabs on
the side of the plate
assembly and pull.
Inspect the 7TN
nozzle for plugging or
damage. Replace if
necessary.
Reinstall plate
assembly. Guide shift
lever between stops
as shown in Fig. 4.
The R75M Debris Sweeping Sprin-
kler requires a ridgid inlet pipe, at
least 6” long.
R75DSS 8/16
1
2
3
4
NOZZLE COMES FACTORY INSTALLED. TO ACCESS THE NOZZLE:
[CLICK!]
SHIFT LEVER
Make sure shift lever
is between stops as
shown. Adjust stops
to give desired arc of
coverage
STOPS
RIDGID PIPE
6” Min.
