Tucker GmbH,
Mail / Post:
Max-Eyth-Str.1, 35394 Gießen, Germany
Stud welding unit N800i
As of 24.08.2021
Manual part number: BE 1227
23
Warning!
Contravention of intended use or usage exceeding this, is
inadmissible and possibly dangerous.
The manufacturer is not liable for damage resulting hereof; the
opera- tor alone bears the risk!
1.
UVV „Electrical installation and operating materials“ (2001)
2. BGR 500: Operating working material (2007)
2.4 Guarantee and liability
Guarantee and liability claims in case of physical injury and damage to property are
excluded if they are due to one or several of the following causes:
•
Non
‐
intended use of the Nelwled N800i welding unit
•
Non
‐
compliance with the operating instructions of the Nelweld unit and associated
options
•
Non
‐
compliance with the operating instructions for the system components
•
Use in moist, inflammable and potentially explosive surroundings
•
Use in residential and commercial areas as well as in business establishments
•
Improper start
‐
up, maintenance and conversion of the welding head
•
Start
‐
up in case of improperly mounted supply tube system
•
Non
‐
observance of the working and safety notices in the operating instructions
•
Improper handling of the shielding gas supply devices
•
Improperly implemented repair work
•
Repair by unqualified personnel
•
Arbitrary structural alterations to the system
•
Non
‐
observance of the stipulated maintenance intervals
The Nelwled N800i welding unit is only designed for the range of ap
‐
plications,
which is specified in on
“Intended use”.
Summary of Contents for N800iTM
Page 18: ......