117
Tucker GmbH,
Mail / Post:
Max-Eyth-Str.1, 35394 Gießen, Germany
Stud welding unit N1500i
As of: Aug 12.2021
Manual part number: BE 1221
10.Troubleshooting
10.1 How to use Troubleshooting guide
Warning!
Service and Repair should only be performed by Nelson Factory
Trained Personnel. Unauthorized repairs performed on this equipment
my result in danger to the technician and machine operator and will
invalidate your factory warranty. For your safety and to avoid
Electrical Shock, please observe all safety notes and precautions
detailed throughout this manual.
Warning!
Heat sinks on the switch boards have HIGH VOLTAGE. DO NOT
remove plexiglass when the power is on.
This Troubleshooting Guide is provided to help you locate and repair possible
machine malfunctions. Simply follow the procedure listed below.
LOCATE PROBLEM (SYMPTOM)
•
Look under the column labeled "PROBLEM (SYMPTOMS)". This column
describes possible symptoms that the machine may exhibit. Find the listing that
best describes the symptom that the machine is exhibiting. If the problem is
accompanied by a flashing warning symbol, see the error code section for more
details.
POSSIBLE CAUSE
•
The second column labeled "POSSIBLE CAUSE" lists the obvious external
possibilities that may contribute to the machine symptom.
SOLUTION RECOMMENDED
•
This column provides a course of action for the Possible Cause, generally it
states to contact your local Nelson Authorized Field Service Facility.