Using Monitor Trend Data
76
N-600x Operator’s Manual
O
XI
M
AX
Sensor Type
When an
O
XI
M
AX
sensor is connected to the monitor, a “SENSOR
TYPE:...” message is displayed for 4 to 6 seconds at the bottom of the
display. The message identifies the type (model) of
O
XI
M
AX
sensor
connected to the monitor. Type is used in the determination of action
messages in the
O
XI
M
AX
sensor message(s) function. This display is
the first message displayed when an
O
XI
M
AX
sensor is connected to
the monitor.
Selecting the Trend Data Display Scale
The trend scale is the amount of trend data displayed on the screen.
1. With the monitor in the normal monitoring mode, press the
TREND softkey.
2. Press the MONITR softkey.
3. Press the VIEW softkey.
4. Press any of the trend softkeys (DUAL, SPO2, or PULSE). To
select HIST (histogram) or AMP (amplitude), press the NEXT
softkey and then the HIST or AMP softkeys.
Summary of Contents for OXIMAX N-600X Series
