Nellcor OXIMAX N-600X Series, Operator'S Manual

Page: 18 / 212

Symbols, Controls, Displays and Indicators
10 N-600x Operator’s Manual
About the Controls
ON/STANDBY Button
Turns the monitor on and off.
Note : Pressing a button, except the ON/STANDBY button, should
result in either a valid or an invalid key tone (refer to Table 3). If the
key pressed fails to emit a tone, contact qualified service personnel.
ALARM SILENCE Button
Silences current alarms for the alarm silence duration period. When
an alarm has been silenced, pressing the button again reactivates, or
“unsilences” the alarm. It is also used to view and adjust alarm silence
duration and alarm volume. The ALARM SILENCE button clears
“SENSOR OFF,” “LOW BATTERY,” and “SENSOR
DISCONNECT” messages from the display.
ADJUST UP Button
Increases variable parameters of the monitor.
ADJUST DOWN Button
Decreases variable parameters in the monitor.