Nellcor OXIMAX N-560, Operator'S Manual

Page: 94 / 124

Technical Information
86
Factory Defaults
The N - 560 is shipped with factory default settings. Authorized technical
personnel using the procedures described in the N - 560 service manual can
change default settings.
Table 5: Factory Default Settings
Parameter Range
Factory Default
Setting
%SpO
2
Upper Alarm
Limit
Lower Alarm Limit plus 1
to 100% 100%
%SpO
2
Lower Alarm
Limit
20% to Upper Alarm
Limit minus 1 85%
Pulse Rate Upper Alarm
Limit Lower Alarm Limit plus 1
to 250 bpm 170 bpm
Pulse Rate Lower Alarm
Limit 30 bpm to Upper Alarm
Limit minus 1 40 bpm
Alarm Silence Reminder On or Off On
Alarm Silence Duration Off, 30, 60, 90, 120
seconds 60 seconds
Alarm Silence
Restrictions • Audible reminder
• No audible reminder
• Do not allow alarms off Audible reminder
Alarm Sound Selector 1, 2, 3 1
Alarm Volume 1 to 10 4
Data Port Baud Rate 2400, 9600, 19200 19200
Data Port Protocol 1, 2 1 (ASCII)
Display 0, 1 0 (On)
In-Sensor Trend Mode 0, 1, 2 0 (Event SpO
2
)
Language English English
Pulse Beep Volume 0 to 10 4
RS-232 Nurse Call
Priority Normally high, normally
low Normally low
SatSeconds Off, 10, 25, 50, 100 Off