Basic operation
en
39
2.
Press
Termin.
repeatedly until
the display indicates the desired
"Ready in" time.
3.
Press
Inicio/Pausa + Carga
.
Soaking laundry
You can soak the laundry before
washing in the appliance by pausing
the programme.
Note:
No additional detergent is re-
quired. The washing solution is then
used for washing.
1.
Start the programme.
2.
To pause the programme, after ap-
prox. 10 minutes, press
Inicio/
Pausa + Carga
.
3.
To resume the programme, after
the desired soaking time, press
Inicio/Pausa + Carga
.
Adding laundry
Note:
Please read the information in
the "Safety" →
sec-
tions to ensure that you use the appli-
ance safely.
1.
Press
Inicio/Pausa + Carga
.
The appliance is paused and
checks whether it is possible to
add or remove laundry. Take note
of the programme status.
2.
Add or remove laundry.
3.
Close the door.
4.
Press
Inicio/Pausa + Carga
.
Cancelling the programme
Once the programme has started,
you can cancel it at any time.
Note:
Please read the information in
the "Safety" →
sec-
tions to ensure that you use the appli-
ance safely.
1.
Press
Inicio/Pausa + Carga
.
2.
Open the door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
programme.
– If the water level is high: Start
the or
programme.
3.
Remove the laundry.
Resuming the programme
when the programme status
is Rinse Hold
1.
Set the or
programme.
2.
Press
Inicio/Pausa + Carga
.
Unloading the laundry
Note:
Please read the information in
the "Safety" →
sec-
tions to ensure that you use the appli-
ance safely.
1.
Open the door.
2.
Remove the laundry.
Switching off the appliance
1.
Turn the programme selector to .
2.
Wipe the rubber gasket dry and re-
move any foreign objects.