Extended FlexZone
en
11
2.
Press .
a
lights up. The FlexZone is connected.
Note:
If you move or lift the cookware from an active
connected cooking zone, an automatic search starts.
Each item of cookware that is found within the cooking
zone during this search is heated at the previously se-
lected power level.
8.3 FlexZone disconnecting
▶
Touch .
a
The cooking zones are separated and work inde-
pendently of each other.
9 Extended FlexZone
With the extended cooking zone, you can cook with lar-
ger cookware or position long cookware sideways on.
The extension always switches on in conjunction with
one of the two flexible cooking zones. You cannot
switch the extension on separately.
9.1 Position the cookware according to
weight and size
Position the cookware in the middle over the rear part
of the flexible cooking zone and its extension.
Depending on the size of the cookware and the
covered cooking surface, you can switch on the flexible
cooking zone as two separate cooking zones or as one
connected cooking zone:
9.2 Activating Extended FlexZone
1.
Place the cookware on the flexible cooking zone so
that it covers the extension.
2.
Select the cooking zone and the power level. The
displays for the cooking zone and
for the exten-
ded zone light up.
a
The zone is activated.
Note:
If the display does not light up, lift the cookware
and place it back on the cooking zone.
9.3 Deactivating Extended FlexZone
▶
Select the cooking zone, use the button to select
the cooking zone and set it to using the Twist-
Pad®.
a
The function has been deactivated.
10 PowerMove
You can use this function to change the power level of
an item of cookware by simply sliding it forwards or
backwards in the flexible cooking zone. The zone is di-
vided into three areas with different power levels.
10.1 Positioning and moving the cookware
Only use one item of cookware. The cooking area de-
pends on the cookware used, as well as its size and
positioning.
Each cooking area has a preset power level:
¡
Front area = power level
¡
Middle area = power level
¡
Rear area = power level
You can change the standard setting of the preset
power levels. You can find out how to do this in the
"Basic settings" section →
