NEFF T59 T6 Series, Instruction Manual

Page: 18 / 32

en
ShortBoost function
18
x
ShortBoost function
ShortBoost function
The PowerBoost function enables you to heat cookware
faster than when using heat setting
Š
.
After deactivating the function, select the appropriate
heat setting for your food.
This function can always be activated for a hotplate,
provided the other hotplate in the same group is not in
use (see illustration). Otherwise,
˜
and
Š
will flash in
the display for the selected hotplate; the
Š
heat setting
will then be set automatically without activating the
function.
Note:
With the flexible cooking zone, the ShortBoost
function can be activated even if it is used as the only
cooking zone.
Recommendations for use
■
Always use cookware that has not been pre-heated.
■
Use pots and pans with a flat base. Do not use
cookware with a thin base.
■
Never leave empty cookware, oil, butter or lard to
heat up unattended.
■
Do not place a lid on the cookware.
■
Place the cookware on the centre of the hotplate.
Ensure that the diameter of the base of the
cookware corresponds to the size of the hotplate.
■
You can find information on the type, size and
positioning of the cookware in section
~
"Induction
cooking"
Activating
1.
Select a hotplate.
2.
Touch the ˜ symbol twice. The ˜ and w indicators
light up.
The function is activated.
Deactivating
1.
Select a hotplate.
2.
Touch the ˜ symbol. The ˜ and w displays go out.
The heat setting Š lights up in the display for the
hotplate.
The function is deactivated.
Note:
In certain circumstances, the ShortBoost function
can switch itself off automatically in order to protect the
electronic elements inside the hob.
z
Keep warm function
Keep warm function
This function is suitable for melting chocolate or butter
and for keeping food warm.
Activation
1.
Select the required hotplate.
2.
Touch the – within the next 10 seconds.
– lights up on the display.
The function is activated.
Deactivation
1.
Select the hotplate.
2.
Touch the
–
symbol.
The
–
indicator goes out. The hotplate switches itself
off and the residual heat indicator lights up.
The function is deactivated.